4 UNIVERSAL REQUIREMENTS OF A DWELLING ADVANTAGE

4   UNIVERSAL REQUIREMENTS OF A DWELLING ADVANTAGE

i.

Teleologic Schedule

1Check list of the

2 universal design requirements

3 of a scientific dwelling facility—

4 as a component function

5 of a new world encompassing, service industry—

6 predesigned,

7 rather than haphazardly evolved,

8 which thus avoids

9 a succession of short-circuited

10 and overloaded burnouts

11 of premature, and incompetent

12 attempts to exploit the ultimate

13 and most important phase of industrialization,

14 to wit,

15 the direct application of highest potential of scientific advantage

16 toward advancement of world living standards—to be accomplished by inauguration of a comprehensive anticipatory technology

17 scientifically informed of the

18 probable variables and possible randoms—this new volition to succeed

19 the era of ‘‘survival’’—

20 that is survival-despite—

21 despite preponderant submission to ignorance—ignorance of future probabilities

22 and general behavior of nature—

23 which heretofore ‘‘survival’’ tolerated lethal opportunism,

24 wherein the progressive deteriorations bred emergencies which called upon scientific ability

25 to perform last minute miracles but

26 only as a curative dispensation of morbid inertia.

27The universal design requirements of a scientific dwelling facility are that it accomplish comprehensive advantage for man over all primitive factors of energetic nature. The factors may be broadly classified in four parts as follows.

28note: That I and II below are subjective and defensive and exclusive and that HI and IV Eire objective and offensive and inclusive.

29 NOTE: That I define the outer ramparts and II the inner defenses while IH represents the inner initiative-taking and IV the full grown outer offensive—conquest—contact.

30note: That this arrangement is geometrically teleologic, i.e. omnidirectionally convergent-divergent—irreversibly propogative.

31I. Essentially random and SUBJECTIVE phenomena

A.

Exterior variables—factors of destructive or useful potential; of nakedly intolerable magnitudes, inescapably impinging

B.

Interior variables—factors of destructive or useful potential; of nakedly intolerable magnitudes, inescapably impinging

C.

Exterior constants of relative inertia forgotten through persistent obviosity and randoiply re-encountered

II.

Essentially routine and subjective phenomena—internal TO DWELLING—PREDICTABLY PERIODIC, RHYTHMIC

A.

Inescapable functions of the organic processes, internal to dwelling and external to man

B.

Inescapable functions of the organic processes, internal to dwelling and internal to man

C.

Interior constants of relative inertia forgotten through persistent obviosity, and regularly rediscovered, e.g. furniture to be lifted with each housecleaning.

III.

Essentially random and OBJECTIVE phenomena—INTERNAL TO DWELLING—INITIATIVE, SPONTANEOUSLY INTERMITTENT—TELEOLOGIC

A.

Investment of earned increments of lifetime for free will regeneration of the advantage of life over a priori environment. Realization of man’s potentials as an individual

B.

Implemented and insulated spontaneity of feedback acceleration-continuity of the self amplifying individual

IV.

Essentially INCISIVE and routine OBJECTIVE phenomena— EXTERNAL TO DWELLING—INITIATING A SUSTAINABLE COMPLEX CONTINUITY = design realization of all men's joint potential—TELEOLOGIC

A.

Investment of earned increments of technical advantage of the science-industry complex in design realization of the complex dwelling facility service

B.

Implementation and insulation of synergetic feedback of higher order accruing to spontaneous group realizations of newly evolving potential

32Expanded expression of those four broad classifications of universal design requirements for a dwelling facility. Original topic of broad classification not repeated and referred to only by number.

I.

A. Structural, mechanical or chemical interception and control of externally impinging factors, either by rejection, reflection, deflection, through shunting, channelling, impounding, modulating and/or retiming of volumetric flows of variable external factors of nakedly-intolerable magnitudes

i.

Immunization against aperiodic, energetic interferences—externally impinging at intolerable magnitudes and heretofore classified as ‘‘cataclysmic,’’ because exceeding the practical stress abilities of as yet available technology. However (new era essence) since accomplishment of higher physio-chemical stress abilities in, for instance, supersonic flight and snorkle submarine, the stress abilities of technology in general now far exceed the predictable stresses of the hitherto cataclysmic structural interferences—the 180 m.p.h. velocity of antarctic hurricane or Pacific typhoon is now a relatively minor aeronautical velocity-of-interaction of designed structures. External impingements are classified in the order of

33

34frequency of probable occurrence and relative magnitudes.

35 A. ‘‘Cataclysmic’’

36 Improbably annual, possibly ‘‘never,’’ and least frequent, but of highest stress when occurring

39 B. ‘‘Dangerous’’

40 Probably annual, or borderline ‘‘disaster’’ magnitudes

1.

gale

2.

local fire

3.

flood

4.

pestilence

5.

lightning

6.

selfishness (self-preoccupation pursued until self loses its way and self-generates fear and spontaneous random surging, i.e. panic, the plural of which is mob outburst in unpremeditated wave synchronizations of the individually random components)

c.

‘‘Inclement"

48 of high seasonal frequency and of low orders of stress or of naked intolerability

1.

fumes

49 9. heat

10.

cold

11.

epidemic

12.

vermin

13.

insects

14.

fungi

15.

minor random

50 missiles

2.

hail

3.

rain

4.

snow

5.

dust

6.

electrolysis

7.

oxidation

8.

vibration (noise)

2.

Rejection, or deflection for delayed or immediate use as

a.

energy, admitted into direct work as, for instance, radiation or electronic reaction, or indirectly into work as, for instance, impounded wind (aeronautical) or water (hydraulic) power

1.

piped—for direct use

2.

wired—for direct use

3.

valved—for direct or delayed use

4.

stored—in cistern, tank or battery for delayed use

5.

stored—in thermal bank or compost bins, etc.

I.

B. Dynamic Control of Internally Impinging Factors

1.

Interception of and dispellment of the momentum trends of ignorance, through incorporation of experience informing natural design replacements, realized in physical principles.

2.

Interception and neutralization of bacteria by isolation of, or by direct elimination

3.

Elimination of physical fatigue

A.

human robotism and drudgery by provision of adequate mechanics of technical advantage

4.

Elimination of psychological fatigue (repression) by

A.

removal of accident hazard through mechanical adequacy (don’t proofing)

B.

removal of arbitrary cellular limitations to permit free interaction of living functions

C.

provision for selective privacy by push-button sound, sight and smell barriers surrounding any interior space

5.

The elimination of emotional fatigue

51

52A. factors stimulating nerve reactions to be automatically controlled in ‘‘neutral’’ until voluntarily brought into play by the occupant through:

6.

Provision of mechanics for wide range in selection of means and degrees of sensible realization of the prosaic or harmonic phenomenon

A.

visual

B.

aural

C.

tactile

D.

olfactoral, i.e. taste and smell

I.

C. Control by anticipatory design over exterior constants of inertia forgotten through persistent obviosity and only randomly re-encountered

1.

Constants of environment, i.e. the mud forgotten between rains, odorous winds from remote sources, snowdrifting

2.

Control devices installed for seasonal duration only requiring inordinate time investments

3.

Chemical accumulations (oxides, sludges, fumes)

4.

Biological accumulations

A.

vegetation, composts, weed

53

54B. insect, animal residues, nestings, general growth changes

5.

Surprise emergencies of environmental complex unique to locality, i.e. possible water, oil, gas springs and seepage

55II. A. Provision for (unselfconscious) (spontaneous) mechanical performance of inevitable organic routines of the dwelling and its occupants with minimum of invested attention or effort

1.

Fueling of

56 A. house

b.

occupant (eating) (metabolism)

2.

Realignment of house or occupants in sleep by allowed muscular, nerve and cellular realignment accomplished by designed elimination of known restrictive factors

57 5. Refusing of house or occupants

A.

internal, i.e. intestinal, etc.

B.

external, i.e. bathing or pore cleansing

c.

mental, i.e. elimination by empirical dynamics

D.

circulatory: external—atmospheric control; internal —as respiratory functions.

58II. B. Control by anticipatory design over interior constants of relative inertia forgotten by fatigue cloture of feedback sensibilities and routinely re-encountered (such as heavy furniture to be moved about daily for cleanliness operations, storages to be overhauled to obtain the tentatively retained devices of possible or infrequent use)

1.

By provision of adequate occupational-specialty storage means

2.

By home employment of travel equipment

59

605. By dimensional reduction (e.g. of collections of large data to microfilm)

61 IH. A. Provision of ready mechanical means, complementing or implementing, all development requirements of the individual’s potential growth phenomena—allowing the facile, scientifically efficient, no-energy-or-time- loss—spontaneous development of self-disciplined education, by means of

i.

Conning, i.e. selectively stimulated awareness of the momentary interactions of universal progressions accomplished by means of facile reference to vital data on

A.

history

B.

news

C.

forecasts

62

63calls for a conning facility combining book and periodical library, radio, television facilities, systematically arranged incoming reports on

1.

current supply and demand conditions

2.

current dynamic conditions - weather - earthquakes—latest scientific research findings

64

655. social dynamics-surfacing of commonweal problems of comprehensive readjustment to new potential and concomitant obsolescence factors

4.

latest technical reference in

a.

texts

b.

movie documentation

c.

television university (soon evoluting to increasing importance and reliability as the Autonomous Dwelling Facility becomes widely available)

2.

Adequate mechanics of personal articulation (prosaic or harmonic) for the spontaneous investment of the imagination-gestating intellectual-increments of experience—(teleology) which trend ever to satisfy the evolving need—prosaic or harmonic—routine or plus. This category of original articulations also includes the necessity or crystallization of universal progress

A.

instruments and tools of communication

1.

direct

2.

indirect

3.

aural

4.

visual

5.

tactile

a.

music, writing, drawing, measuring instruments

b.

wood, metal and chemical working tools

c.

typewriter

d.

wire-tape-and-disc-all-purpose-recorder- synced radio-phonograph-filmstrip projector

e.

easel

f.

photographic equipment—taking, developing, printing, projection

3.

Recreation—appropriate equipment to full physical development

4.

Procreation

66HI. B. Insulation, or Isolation, of the Instrumented Initiatives HI. C. Means of displaying, exposing, experimenting and measuring for progressive improvement of ‘‘target’’ or ‘‘trend to target’’ or ‘‘trend following’’ assumptions-of-realiza- tion-initiative-and-articulation—i.e. ‘‘vital navigation’’ or ‘‘teleology’’; i.e. personal and social and cosmic feedback

67

68control. The comprehensive ‘‘frames,’’ relative to which display, exposure, experiments, measurement and progressive dynamic trend assumptions may be referenced is FOURFOLD.

69 Objective Aspect

1.

Subvisible

70 Microcosmic

2.

Geo-visible

71 Geographical

72

73{Visible, near}

74 Earth

75Subjective Aspect nuclear particles atoms molecules cells, genes crystallographic biologic sub-surface surface envelope

76 Consolidated Intellectual
Advantage, or aids

77 atomic charts, periodic, etc. spectrographic charts molecular models biological slides

78 globes, maps, geological stratification maps

79 world and local physiological data

80 spectrum charts

3.

Astro-visible Macrocosmic {Visible,

81remote)

4.

Supravisible Comprehensive

82

83Omni- permeative

84 comets asteroids planets stars nebula

85 abstracted principles

86 radiation

87 star globes star charts

88 energetic geometry devices (vectorial, formative, transformative, number)

89 number sets group behavior phenomena

90 probability transformations

91

92independent of dimensions

93 finity and definity

94 PHASE I, INDIVIDUAL

95IV. Realization

96

97The whole program of realization is to be considered in the following order which breaks into two primary categories or phases: (i) the initial work to be undertaken by the individual prior to his engagement of the aid of associates and (2) original and initial work to be undertaken by the first group of associates. These two phases may be subdivided as follows.

98IV. A. Research and development by initiating individual (prior to inauguration of design action and development action involving full-time employment of others). Inauguration of a general work pattern as a natural pattern coinciding with best scientific procedure to wit: Preliminary

99 Initiation of diary and notebook

100

101Initiation of photographic documentation Initiation of tactical conferences

1.

Comprehensive library study of accrued developments within the pertinent arts *

102 * Pertinent arts to be studied by the initiating individual include:

1.

Anthropological data

2.

Energetic Geometry, the philosophy of mensuration and transformation, relative size

5.

Theory of structural exploration

4.

Theory of mechanical exploration

5.

Theory of chemical exploration

6.

Energy as structure

7.

Dwelling process as an ‘‘energy exchange’’

8.

Dwelling process as an ‘‘energy balance sheet’’

9.

Theory of structural complex

10.

Theory of service complex

11.

Theory of process complex

12.

Theory of structural and mechanical logistics

13.

Theory of complex resolution

103a. past

B.

contemporary

2.

Listing therefrom of authorities available for further information

104. local, personal contact

B.

remote, correspondence

5.

Pursuant to information thus gained, calling at suggested local laboratories

A.

university

B.

industry

C.

setting up of informative tests for first hand knowledge in own laboratory

4.

First phase of design assumption

A.

consideration of novel complex interaction unique to project

B.

preferred apparatus from competitive field

C.

design of appropriate flowsheets

5.

Flowsheets submitted to

A.

those competitive specialists who have proved helpful in steps b and c

B.

industrial producers of similar equipment and assemblies

C.

make informative tests for closure of gaps supporting assumed theory

105

106. Submit specifications and drawings of general assembly and unique component parts for informative bids by manufacturers

107A. second redesign of flowsheet based on available and suggested apparatus, price information, etc.

7.

Prepare report consisting of diary of above, supported by photographic documentation and collected literature—with trial balance conclusions of indicated economic advantage (which, if positive, will inaugurate Phase II)

108 PHASE II, COLLECTIVE

109IV. B. Design and development undertaking—involving plural authorship phase and specialization of full-time associates. Consideration of relationship of prototype to industrial complex by constant review of principles of solution initially selected as appropriate to assumptions. Adoption of assumptions for realization in design of pertinent principles and latest technology afforded

i.

Comprehensive survey of whole sequence of operations from original undertaking to consumer synchronization

110

111Realization strategy No. i by individual (Phase I) Realization strategy No. 2 by associates (Phase II)

A.

Physical tests in principle of the design assumption’s unique inclusions not evidenced in available data

B.

General assembly drawings (schematic) providing primary assembly drawing schedule reference

C.

General assembly assumption, small scale models and mockup full size

D.

Primary assembly, sub-assembly and parts calculations (stress)

E.

Trial balance of probable parts weights and direct manufacturing costs (approximately three times material costs} includes labor, supervision and inspection) and forecast of overall cost magnitudes, and curve plotting—at various rates of production, ratioed to direct costs per part and ‘‘all other costs’’—

i.

e. ‘‘overhead’’ tool and plant ‘‘amortization’’ ‘‘contingencies,’’ ‘‘profit’’

F.

‘‘Freezing’’ of general assembly and its reference drawing

G.

Drawing for first full size production prototype commences in general assembly, primary assembly, subassembly and parts

H.

Budget of calculating and drawing time is set with tactical deadlines for each

I.

Parts drawing and full size lofting and offset patterns

J.

Prototype parts production on ‘‘soft tools’’ commences

K.

Sub-assembly and primary assemblies replace ‘‘mockup’’ parts

L.

Physical tests of parts and sub-assemblies with ‘‘obvious’’ corrections and ‘‘necessary’’ replacements (not ‘‘improvements’’ or ‘‘desirables’’ which must be deferred until second prototype is undertaken after all comprehensive physical tests have been applied)

M.

Photography of all parts and assemblies

N.

Full assembly completed and inspected—cost appraised with estimates of possible ‘‘improvement’’ savings to be effected

O.

Static load tests

P.

Operational tests

Q.

Assembly and disassembly tests

R.

Photography of all phases

S.

Packaging and shipping tests

T.

Estimates of savings to be effected by special powered field tools

U.

Opinion testing

V.

Final production ‘‘clean-up’’ prototype placed in

112 formal calculation and drawing with engineering budgeted with deadlines

113 w. Parts cost scheduled by class ‘‘A’’ tools and time

X.

Production tool layout fixed

114 Y. Production tools ordered

115 z. Production dates set

116 A'. Lofting and offsets produced of full-size-test ‘‘masters’’ and templates

117 B'. Fabrication of special jigs and fixtures

118 C'. Production materials ordered

119 D'. Production tool-jig-fixture tune-up

120 E'. Parts and assembly testing

121 F'. Field operation scheduling

122 G'. Field tools ordered

123 H'. Distribution strategy in terms of initial logistic limitations

124 I'. Field tests with special tools

125 J'. Field tools ordered or placed in special design and fabrication

126 K'. Test target area selected for first production

127 L'. Production commences

128 M'. First field assemblies with power tools

129 N'. Maintenance service instituted and complaints

1.

alleviated

2.

analyzed

3.

change orders of parts instituted

130 o'. Plans for ‘‘new’’ yearly model improvement run through all or previous steps—for original production

2.

Production and distribution velocity assumptions

3.

Plotting the assumed progressive mass-production

131 curves to determine basic velocities of new industry

4.

Tensioning by crystalline, pneumatic, hydraulic, magnetic means

5.

Compressioning by crystalline, pneumatic, hydraulic, magnetic means

6.

Consideration of manufacturer’s basic production forms—relative to proposed design components for determination of minimum steps, minimum tools, and minimum waste in realization

7.

Establishment of priority hierarchies of effort

8.

Time-and-energy-and-cost budgeting

132 g. Assumption of industry responsibility for field practices, not only in mechanical and structural, but in economic design.

10.

Designing for specific longevity of design appropriate to anticipated cycles of progressive obsolescence and replacement ability as ascertained from comprehensive economic trend curves

11.

Designing with ‘‘view to efficient screening of component chemicals for recirculated employment in later designs’’

12.

Maxima and minima stated and realized performance requirements per unit of invested energy and experience and capital advantage of tools and structures employed and devised

13.

Logistics assumptions, compacted shipping considerations as original design requirement in

A.

nesting

B.

packaging

C.

compounded package weight

D.

relationship to carriers of all types

E.

field delivery

F.

field assembly

G.

field service and replacement

14.

Consideration of tool techniques

15.

Consideration of materials’ availability

A.

at time of design

B.

in terms of world economic trends

133 c. in terms of world potential

16.

Consideration of materials ratio per total design

17.

Elimination of special operator technique forming

18.

Elimination of novel special soft tool designing

19.

Numbers of

A.

types

B.

repeat parts

134 c. sub-assemblies

D.

primary assemblies

20.

Numbers of forming operations

21.

Number of manufacturing tools by types

22.

Schedule of forming operations included on parts drawings

25.

Decimal fraction man hours per operation

24.

Designed-in over-all one-man-ability at every stage of operation

25.

Schedule of design routines and disciplines

26.

Establish a ‘‘parts’’ inventory of ‘‘active’’ and ‘‘obsolete’’ drawings—from beginning

27.

Establish a ‘‘parts’’ budget of ‘‘required’’ designs of ‘‘parts’’ for assemblies and major assembly and general assembly and molds

28.

Drawing dimension standards

29.

Establish a numbering system of controlled parts

135 jo. Establish purchasing techniques, jig and fixture, lofting techniques

136IV. C. Public Relations

137 To run concurrently with all phases of IV. B.

138 i. Education of public

139Rule I: Never show half-finished work

A.

General magnitude of product, production, distribution. But no particulars that will compromise latitude of scientific design and production philosophy of IV. B.

B.

Publicize the ‘‘facts,’’ i.e. the number of steps before ‘‘consumer realization’’

140 c. Understate all advantage

D.

Never seek publicity

E.

Have prepared releases for publisher requests when ‘‘facts’’ ripe

2.

Realization by Design

141A Priori Design Realization Assumptions

142 Asking not why, whither, nor whence man-life?

143 But assuming

144 the accumulated experience evidences

145 that biological phenomena

146 in general

147 and man-life

148 in particular

149 function in universe

150 as the anti-entropic,

151 the anti-random—the simple and complex organic— the systematically convergent phases

152 of the comprehensive

153 omni energy transformations

154 and therefore industrialization

155 constitutes the comprehensive—transformative expansion

156 of the man-life function in universe—

157 and therefore the realization that man-life’s extension

158 into cosmic measurement

159 already billion-folds

160 the sensory limits of integral faculties

161 presages a further successful amplification

162 of the man-life function in universe

163 and therefore

164 that the regenerative ability of intellect

165 in extension, acceleration, and expansion

166 of the extra corporeal cosmic-functioning-stature

167 of the man-life in universe

168 is realizable

169 in comprehensive design initiative

170 relayed through industrialization

171 and therefore the function of comprehensive design

172 is most naturally and effectively

173 preoccupied with omni-abetment

174 of the realization in full

175 of the potentials of the ‘‘individual’’ complex, an organic atomic nebula

176 identified superficially as man—

177 man potential includes

178regeneratively improving potentials

179 of sequential derivative orders

180 of increasing advantage of the organic

181 over the (random-entropic) chaos growths

182 ‘‘individual’’ man’s highest potential

183 may be realized in terms of full interaction

184 of all men’s potentials—

185 ergo man’s universal function trends

186 to amplify first the pull potential of the individual—

187 but inherently multiplicative man-life

188 therefore

189 on first priority

190 in design consideration

191 is the full realization

192 of individual potential

193 in order to reach the second derivative—

194 full realization for all individuals

195 keys to design realization

196 are the anthropological measurements,

197 of the limiting factors

198 of corporeal man,

199 beyond which extra-corporeal articulation

200 of the integral faculties

201 may be accomplished by extension in principle through atomic-complex trains, and energetic transformations

202 to cosmic stature advantage

203 universal conditions of design realization commence with the static and dynamic dimensions of man

204 and his basic behavior involvements

205 of which there exists a wealth of data

206 Typical

207 How high can he grow?

208 How high can he jump? How high can he reach? How far can he see?

209 How far can he hear?

210 How far can he smell?

211 How long can he live?

212 Etc., etc., etc.

213 Limited to Slow Change Integrally

8.

ft.

214 6 ft.

9.

ft.

215 100,000,000 m.

216ioo m.

217 etc.

218 etc.

219 Subject to Accelerating
Change Latest
Extra- Corporeal

220 1,200 ft.

221 to the moon

222 to the sun

223 186,000 x 60 x 60 x 24 x 365 x 1 billion m.

224 1,000,000,000 m.

225 etc.

226 etc.

227 All above figures schematic only; for accurate figures see world almanacs.